Press Brakes,Mechanical Press Brakes and Hydraulic Press Brake
Home   |   Profile   |   Products   |   Infrastructure and Location   |  Contact Us   |   Enquiry
Press Brakes,Mechanical Press Brakes and Hydraulic Press Brake
Press Brakes,Mechanical Press Brakes and Hydraulic Press Brake ManufacturersPress Brakes,Mechanical Press Brakes and Hydraulic Press Brake SuppliersIndian Press Brakes,Mechanical Press Brakes and Hydraulic Press Brake

 


Our Products

Hydraulic Press Brake


Hydraulic Press Brake
Hydraulic Press Brake

We offer wide range of Press Brakes which are easy to maintain, versatile and have low tooling cost. The all steel structure ensures robust press brake body. Our press brakes are designed to operate on low pressure, as compared to many of our competitors who design their press brake to operate on high pressure which may result in damage of seals, thereby affecting its accuracy and further may result in leakage. Our design facilitates leak proof and accurate operation even under load higher than nominal limit.

Capacity

40 Ton to 600 Ton.

The standard bending length is 2500mm and 3050mm, longer machines (up to 7m) can be manufactured as per customer requirement.

Numerically Controlled back gauge package:

Consists of an internationally reputed make AC Servomotor, Servo drive, PLC controller and COLOR TOUCH SCREEN TFT DISPLAY for desired and current back gauge position.

Back gauge hardware consists of a reputed make ball screw with nut, LM Guide ways, timing pulley & timing belt for precise movement of the gauge.

NC Back gauge will have multi-bend batch processing function.

Standard Features
  • Dead stop arrangement for accurate bending with 0.001mm repeatability which ensures the same bend angle in each stroke.
  • Stroke length can be preset
  • Numerically controlled back gauge from front side of the machine
  • Inching and auto cycle feature
  • Cylinders from high quality forged steel are precisely honed. Piston rods are hand chromed for longer life.
  • Rigid structure with interlocking design ensure minimum deflection even under maximum load.
  • Electric Control Panel with selection of Auto, Inch and Single Cycle Auto Mode operation.
  • Mechanical stop and steel torsion bar to maintain synchronization and high precision
  • One suitable 5-way Die and punch
  • Main drive motor
  • Pair of foot switch
Optional Features
  • Crowning Device
  • Numerically Controlled Back Gauge Package
  • Extra Tooling set as per customer requirement
  • High throat depth
Technical Data of Hydraulic Press Brake Machines

Model Hydraulic Press Brake Machines
BMT Tonn age Table length mm Bending capacity (approx) mm Table width mm Clear Pass mm Ram stroke mm Open Height mm Throat Depth mm Speeds Approach Pressing Return mm/sec Power HP Packing Dim. (LxWxH) mm Weight Kg
RS214 20 1400 2x1250 3x800 125 1050 100 250 100 35-10-40 3 1700x1050x1900 1500
RS320 30 2100 2x2000 3x1250 125 1550 100 250 200 30-7-30 3 2200x1150x1900 2500
RS425 40 2500 2x2500 3x1500 180 2050 100 250 200 40-8-45 5 2700x1150x1900 3000
RS515 50 1500 4x1500 5x1250 180 1050 100 250 200 40-7-42 5 1700x1150x1900 2500
RS520 50 2100 3x2000 4x1500 180 1550 100 250 200 40-7-42 5 2200x1150x1900 3200
RS525 50 2500 2.5x2500 3x2000 180 2050 100 250 200 40-7-42 5 2700x1150x1900 3500
RS625 65 2500 3x2500 4x2000 180 2050 150 330 200 28-5-40 5 2700x1200x2000 3700
RS630 65 3100 2.5x3000 3x2500 180 2550 150 330 200 28-5-40 5 3350x1200x2000 4300
RS825 80 2500 4x2500 5x2000 180 2050 150 330 200 38-6-45 7.5 2700x1550x2300 4500
RS830 80 3100 3x3000 4x2500 180 2550 150 330 200 38-6-45 7.5 3350x1550x2300 5000
RS1025 100 2500 5x2500 6x2000 180 2050 150 330 200 40-6-45 10 2700x1550x2300 5400
RS1030 100 3100 4x3000 5x2500 180 2550 150 330 200 40-6-45 10 3350x1550x2300 6200
RS1040 100 4100 3x4000 4x3000 180 3100 150 330 200 40-6-45 10 4250x1650x2300 7000
RS1225 125 2500 6x2500 8x2000 230 2050 150 350 300 38-5-42 15 2750x1650x2500 6500
RS1230 125 3100 5x3000 6x2500 230 2550 150 350 300 38-5-42 15 3350x1650x2500 7000
RS1240 125 4100 4x3300 5x3000 230 3100 150 350 300 38-5-42 15 4200x1650x2500 8300
RS1625 160 2500 8x2500 10x2500 230 2050 150 350 300 35-6-45 20 2750x1800x2600 8200
RS1630 160 3100 6x3000 8x2500 230 2550 150 350 300 35-6-45 20 3350x1800x2600 8800
RS1640 160 4100 5x4000 6x3000 230 3100 150 350 300 35-6-45 20 4350x1800x2600 9800
RS2030 200 3100 8x3000 10x2000 230 2550 200 400 300 35-7-45 25 3350x2050x2750 9500
RS2040 200 4100 6x4000 8x3000 230 3100 200 400 300 35-7-45 25 4350x2050x2750 10500
RS2050 200 5100 5x5000 6x4000 230 4100 200 400 300 35-7-45 25 5350x2050x2750 12500
RS2530 250 3100 10x3000 12x2500 300 2550 200 400 300 35-6-42 30 3550x2100x2800 12000
RS2540 250 4100 8x4000 10x3000 300 3100 200 400 300 35-6-42 30 4200x2000x2800 13500
RS2550 250 5100 6x5000 8x4000 300 4100 200 400 300 35-6-42 30 5350x2000x2800 15500
RS3030 300 3100 12x3000 15x2500 300 2550 200 400 300 30-6-38 30 3350x2150x2900 12000
RS3040 300 4100 10x3500 12x3000 300 3100 200 400 300 30-6-38 30 4350x2150x2900 15000
RS3050 300 5100 8x4600 10x3500 300 4100 200 400 300 30-6-38 30 5350x2150x2900 16500
RS4030 400 3100 16x3000 20x2500 300 2550 250 500 350 25-5-40 40 3350x2200x3000 15000
RS4040 400 4100 12x4000 16x3000 300 3100 250 500 350 25-5-40 40 4250x2200x3000 18000
RS4050 400 5100 10x5000 12x4000 300 4100 250 500 350 25-5-40 40 5350x2200x3000 19500
RS5030 500 3100 20x3000 25x2500 300 2550 250 500 350 25-5-40 50 3350x2200x3200 21000
RS5040 500 4100 15x4000 20x3000 300 3100 250 500 350 25-5-40 50 4500x2200x3200 23000
RS5050 500 5100 12x5000 15x4000 300 4100 250 500 350 25-5-40 50 5500x2200x3200 30000

Standard Features - Accessories for basic model

Rugged structure from ultra tested IS 2062 grade B plates rigidity conforming to international standards. Hydraulics, electrics of internationally reputed brands for consistent performance and reliable operation. Pivots with permanently lubricated bearings or hardened part lubricated by central hand pump.
Cylinders of ultra-tested seamless honed tubes, hard chrome-plated pistons. dual seals.
3 Speed bending cycles for faster output yet slow smooth bending with minimal shock loads.
Movable control station with majority controls, emergency stop, up-down foot -switch controls.
Inch cycle mode for srt-up & one-off jobs. Single cycle modes for repeat cycles, production runs.
Hydraulic power gives silent working, better safety against overload, instant stopage-reversal ram.
One set of unhardened standard punch, multi-vee die block.
Lifting hooks for lifting and rotation of die block when using multi-vee die block.






Press Brakes,Mechanical Press Brakes and Hydraulic Press Brake exportersPress Brakes,Mechanical Press Brakes and Hydraulic Press Brake India
Home   |   Profile   |   Products   |   Infrastructure and Location   |  Contact Us   |   Enquiry